Filter
Top Products
5
I. Installation Instructions
A. Unpacking and Checks Before Installation
CAUTION
Unit is heavy. Use care when lifting or positioning. Work in pairs when needed to
prevent injury to persons lifting and to prevent damage to the unit. Hold the
bottom of the unit. Do not hold doors/drawers; they could become deformed or
come off. Do not tilt the unit by more than 45°.
1) All tape and packaging should be removed from the machine prior to installation. The
equipment should be inspected for any damage which may have occurred during
shipment. Concealed damage claims must be filed with the carrier.
a) Visually check that the refrigerant lines do not rub or touch other lines or surfaces and
that the fan blades turn freely.
b) Check that the compressor is snug on all mounting pads.
2) Remove all accessory containers before discarding the packing materials. Dispose of all
packing materials in a proper and environmentally responsible manner.
3) Check for missing or damaged accessories.
4) To remove the unit from the pallet:
a) Move as close to the final location as possible.
b) Remove the bolts that secure the cabinet to the pallet.
c) Block the cabinet securely, at a height of 8 inches (203 mm) off the floor.
d) Attach the casters or adjustable legs to the bottom of the cabinet as necessary.
5) Remove the protective plastic film from the exterior and interior. If the unit has been
exposed to the sun or to heat, remove the film after the unit cools.