Filter
Top Products
40
g. Clogged Filter Sensor Malfunction Alarm (E9)
If the input from the clogged lter sensor is below the clogged lter sensor open circuit
detection point (equivalent to -7.6°F (-°C)), "E9" is displayed. "E9" is also displayed
when input from the clogged lter sensor is above the clogged lter sensor short circuit
detection point (equivalent to 186.8°F (86°C)) for 10 minutes or more.
Note:
• If this alarm appears, rst make sure that the sensor is properly connected.
• A short circuit can be detected immediately by turning on the power while pressing
the button. In this case, "E9" will be displayed immediately if a short circuit is
detected.
Reset Options
The alarm automatically resets when one of the following conditions is met:
• The input from the clogged lter sensor exceeds the open circuit detection point
(equivalent to -7.6°F (-°C)).
• The input from the clogged lter sensor drops below the short circuit detection point
(equivalent to 186.8°F (86°C)).
• A functioning clogged lter sensor (gray) is installed.
Possible Causes
• Trouble with the clogged lter sensor (gray).