Filter
Top Products
10
IMPORTANTIMPORTANT
IMPORTANTIMPORTANT
IMPORTANT
Before operating the icemaker, the Bin Control Thermostat must be installed
correctly.
5) Install the Bin Control Thermostat as follows. See Figures 3a, b and c.
(a) Remove the Tie securing the Bulb Holder. Remove the Thermostat Bracket (F) from
the Shipping Hook by lifting up the Bracket (F) and shifting it to the right.
(b) Lower the Thermostat Bracket through the hole located at the bottom of the
icemaker.
(c) Slide the Thermostat Bracket (F) toward you with the bottom surface contacting the
Thermostat Bracket (E).
(d) Hook the Thermostat Bracket (F).
(e) Insert the Plug into the Receptacle on the Bracket until it locks in place.
(f) Secure the Thermostat Bracket in place with the thumbscrew.
Fig. 3aFig. 3a
Fig. 3aFig. 3a
Fig. 3a