Filter
Top Products
19
14) Move the control switch to the “ICE” position to fill the water tank with water.
15) After 3 minutes, move the control switch to the “OFF” position.
16) Move the control switch to the “WASH” position.
17) After 5 minutes, move the control switch to the “OFF” position.
18) Remove the plug to drain the water tank. After draining, replace the plug in its correct
position.
19) Repeat 14) through 18) two times to rinse thoroughly.
20) Flush the storage bin with water.
21) Move the control switch to the “ICE” position, and start the automatic icemaking
process.
22) Replace the front panel in its correct position, and close the door.