Filter
Top Products
8
GB
ICE trays.
The Easy Ice trays are set into the top part of the
freezer drawers to maximise the space within the
freezer. The trays are drip-free and sealed to prevent
food from tainting the ice cubes.
1. Check that the tray is completely empty and fill it
with water through the opening provided.
2. Take care not to exceed the level indicated (MAX
WATER LEVEL). Excess water prevents the ice
cubes from dispensing (if this happens, wait for the
ice to melt and empty the tray).
3. Turn the tray 90°: due to the connected
compartments each mould fills with water (see
diagram).
4. Close the opening with the lid provided and put the
tray back, placing the top part in the corresponding
housing and allowing it to drop in again.
5. When the ice has formed (minimum time
approximately 8 hours) knock the tray against a hard
surface and wet the outside so that the ice cubes
come loose and take them out through the opening.
MAX
WATER LEVEL
MAX
WATER LEVEL
ICE PARTY: tensures bottles
of sparkling wine or
champagne reach the right
temperature.
Place the bottle in the pre-
frozen ice bucket located
inside the FREEZER and
STORAGE compartment and
select the function on the display.
Remove the bottle when the alert is given.
The bucket may be used to serve the bottle, keeping
it cool after it has been removed from the appliance.