Filter
Top Products
It should not normally be
necessary to clean the Stay Clean
panels with water. If the user
feels it is desirable to do so, wash
them down in warm, soapy water,
followed by rinsing with clear
water: Do not use biological/
enzyme washing powder, harsh
abrasives or oven chemical
cleaners of any kind. Replacement
oven liners arE available should you
require them, from your nearest
Hotpoint Service Centre (see back
page).
Replacement of Oven Lamp
Open the oven door and remove
the rod shelves. Grip the light
glass dome, unscrew anti-
clockwise and lift out. Reach into
the aperture with fingers, and
unscrew the faulty lamp anti-
clockwise (15W 300˚C SES) which
can be obtained from your
nearest Hotpoint Service Centre.
Fit replacement lamp, and refit
dome. When screwing and
unscrewing the faulty lamp use a
thick cloth to protect your fingers
should the lamp break.
Oven Door Removal Main (Lower)
Oven
The door is removable to facilitate
occasional cleaning of heavy
soiling from the oven floor and
from the door itself.
Please note that the door is heavy
and care should be taken not to
pinch your fingers during the
removal and replacement.
To remove, open the door fully
and, using a coin or screwdriver,
turn the two discs clockwise.
Slightly close the door, unhook the
lower hinge fingers, then pull the
door away from the oven front
frame.
To replace, insert the lower
fingers and the hooked ends of
the door stays, ensuring that the
slots in the lower fingers engage
with the front frame.
Fully open the door and turn the
discs anti-clockwise to their
normal working positions.
Close the door - the hinge will now
lock into position.
Care and Cleaning
40
WARNING: ISOLATE THE COOKER
FROM THE SUPPLY BEFORE
REPLACING THE LAMP, TO AVOID
ELECTRIC SHOCK.
WARNING: ISOLATE COOKER
FROM SUPPLY BEFORE
REMOVING DOOR.