Filter
Top Products
I switch the hob on and it
switches off
❏ You are taking more than 10 seconds to choose the
cooking zone you wish to use.Make your choice
more quickly.
❏ You have touched a selection symbol for too long (*)
❏ There is a receptacle or damp cloth on the control area.
Remove it.
❏ Some liquid has spilled onto the control area, or it is
damp. Dry it
❏ You are cleaning the hob and the control area is damp
(*).
❏ Someone is leaning on the control area.
(*) A safety system is activated after about 10 seconds.
❏ This hob is equipped with the latest technology to
ensure the complete safety of its components and of
the user,so the sequence of operations is very
important.
Read the instruction manual again, particularly the
part dealing with the function you wish to use.
❏ This is normal.The hob is not malfunctioning.
❏ Call the Technical Assistance Service.
❏ The plate has been on at high power for a long period
of time.Touch the area marked "+" again and continue
cooking.
❏ The plate has been on at high power for a long period
of time and the control area has overheated.
❏ Wait a few minutes and then touch the power controls
to set a lower heating power,or use a different
cooking plate.
Hob emits a long bleep
I want to use a particular
function, but can’t
The control zone is
slightly warm,even
though the hob is not in
use
The symbols ...appear
The cooking plate turns
itself off in the middle of
the cooking process and
"F" and "8" flash
intermittently on the
control area display
The heating power level
displayed goes down or
completely out in the
middle of the cooking
process and "F" and "2"
flash intermittently on
the control area display
Operating Faults (Cooking plate sensors)
15