Hotpoint BE72 Cooktop User Manual


 
21
Installation
ELECTRICAL CONNECTION
THIS APPLIANCE MUST BE EARTHED.
The electrical safety of this appliance can only be garanteed when the latter is correctly and
efficiently earthed, in compliance with regulations on electrical safety. The manufacturer
denies all responsibility for damage resulting from a system which has not been earthed
correctly.
Before powering the appliance,check whether the technical characteristics featured on the
appliance data plate correspond with those of the electrical system (wire section, protection
devices),which should be suitable for the appliance maximum power.
DO NOT connect the appliance to the electrical supply until all installation work is
complete.
You can connect your hob to the electrical system in two ways:
Using a mains socket. Ensure the socket is easily accessible and confirms to the local
regulations in force. DO NOT use adaptors or multiple plugs,nor extensions.
Or,by meas of a junction box. If the appliance is connected permanently to the
mains,an omnipolar circuit breaker, easily accessible,with a minimum contact
opening of 3mm should be installed.
IMPORTANT
After connecting the appliance to the flexible cable, tighten all the screws on the terminal
board.
Fig. 5
LIVE
NEUTRAL
EARTH