Filter
Top Products
21
Installation Instructions
After installation, check for gas soundness. The supply pressure
can be checked at the grill injector. Access to the injector is by
first removing the baffle at the front of the grill fastened by two
screws. Then remove the fastening screw on the right hand side of
the burner and slide the burner off the injector. Ensure that the
grill burner is correctly located under the fixing screw on reassembly.
Fit the battery. Fit the hotplate burner bodies, enamelled discs and
pan supports. Referring to the instructions for use where
necessary.
1. Check that the hotplate and grill burners ignite correctly and
burn with a steady flame. Check for a steady flame on the low
setting.
2. Check that the burner ignites with the oven set to mark 9 and
that the burner stays on when the control is released 3 seconds
later. Leave the oven on Mark 9 with the door closed for 10 minutes,
then check that when the control is turned to Mark 1 the flame
reduces.
Instruct the user on the operation of the cooker.
On the models manufactured for use with LPG, it is normal for the
oven and grill burners to burn with yellow tips.
Operational
Checks
NOTE: