Hotpoint CH60DPXF S Oven Accessories User Manual


 
38
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
SOMETHING WRONG
WITH YOUR COOKER
Before contacting your nearest Service Centre/Installer, check the problem guide below; there may be nothing
wrong with your cooker.
Burner
p
orts I
g
nitor
Hotplate burner:
PROBLEM CHECK
Burner will not light: If all burners fail to ignite:
Check that sparks appear at the burners; a clicking noise should
be heard.
If not;
Check that the electricity supply is turned on.
If the electricity supply has failed, all burners can be lit by a match.
If only one burner fails to ignite:
Check that the burner is dry and that spillage of food or cleaning
fluid remains are not affecting the ignitor or burner ports.
Clean away any debris with a dry nylon brush such as an old
toothbrush. If a wire wool pad has been used for cleaning around
the burner ensure the ignitor is free from any stray strands. Any
water on the burner should be dried with a cloth or kitchen towel.
On the hotplate make sure that all the burner parts are correctly
seated.
Slight odour or small amount of smoke when
grill / oven used first time.
This is normal and should cease after a short period.
Nothing works If you find that the timer display is blank, then it is likely that there is
no electricity supply to your oven.
Check:
(i) That the main cooker wall is switched on
(ii) Other appliances, to see if you have had a power cut
(iii) The main circuit breaker for the property
Top oven, grill and main oven do not work Operating the cooker under the following conditions may cause a
safety device to operate:
(a) Grilling with the door closed - Always grill with the door fully
open
(b) Grilling for an excessively long period at maximum setting - see
Grilling guide.
Switch off appliance and allow to cool for approx 30 mins. Switch
the cooker back on and check that the Grill, Top oven and Main
Oven are now operating.
Grill keeps turning on and off. When the Grill control is operated, the Grill will cycle on and off,
this is normal and not a fault.
The oven is not working and showing F01 to F68
code in the display
Your appliance has developed a fault which will require
assistance from our service department.