Hotpoint DE89X1 Microwave Oven User Manual


 
Electronic Clock &
Automatic Cooking Feature
14
Note: At any time up to the start of cooking, the cooking end time, cooking duration and
the temperature will be shown in the display.
STEP 6. Press the Time/Mode button, until the ‘end time’
symbol is flashing. The display will show a default
cooking end time (this will be the current time plus
the cooking duration you set in STEP 5).
The ‘end time’ symbol will flash.
STEP 7. Turn the +/- control knob to set the time you wish
the cooking to end.
After a few seconds the display the temperature,
cooking duration and end time in turn.
THE COOKING DURATION AND END TIME IS NOW SET.
The display will show the temperature and cooking
duration when the programme has started.
At the end of the cooking duration, ‘End’ and the ‘cooking
duration’ symbol will show in the display and an audible tone will
be heard for a few seconds.
Turn the main oven control to ‘O’, the OFF position to switch the
oven off. The display will revert back to the time of day.
To cancel the automatic mode at any time turn the main oven
control to ‘O’, the OFF position.
-
+
Main Oven
Light
Time/Mode
-
+
Main Oven
Light
Time/Mode
(b) To set the main oven to switch ON and OFF immediately:
This allows you to cook for a specified duration and additionally choose the time you wish
the cooking cycle to finish. From this information the system works out when the cooking
cycle will need to start and automatically switches the oven on at the required time.
- Follow STEPS 1 to 5 in the previous section (a) entitled: ‘To set the main oven to switch ON
immediately and OFF automatically’, then continue as below: