Hotpoint DF56 Dishwasher User Manual


 
Before carrying out any work, always
disconnect the dishwasher from the
electrical power supply.
Regular inspection and maintenance helps to
prevent problems from occurring. You should
therefore carefully inspect the inside of your
dishwasher from time to time.
Overall condition of appliance.
- Clean the outer surfaces and door lining
of the dishwasher regularly using a soft
cloth moistened with water or with a
detergent which is suitable for painted
surfaces. Clean he door gaskets with a
damp sponge. Avoid the use of acidic
or abrasive detergents.
- Periodically (once or twice a year) it is
advisable to clean the tank and gaskets,
using a soft cloth and water to remove
any deposits.
- Check that no grease or scale has
accumulated on the inside of the
dishwasher.
If you discover any deposits:
- Clean the interior of the dishwasher
thoroughly with a detergent solution.
Cleaning the Filter Unit.
The filters prevent large particles of food in
the water from reaching the pump.These
particles may occasionally block the filters.
- It is advisable to periodically check the
centre filter ‘C’and if necessary to clean
it. To remove the filter,grip the tabs,turn
anticlockwise and lift upwards.
- Push the centre filter ‘D’from the
underside to remove it from the micro-
filter.
- Separate the two parts which make up
the plastic filter by pressing the body of
the filter in the position shown by the
arrows.
- Remove the centre filter by lifting it
upwards.
The filters should be cleaned carefully under
running water using a stiff brush.
- Carefully replace the filters by following
the above instructions in reverse order.
Cleaning the Water Intake Filter.
The water intake filter,located at the outlet of
the water supply tap, needs to be cleaned
periodically.
Turn OFF the water supply tap,unscrew the
water intake hose to remove from the tap.
Clean the filter carefully,under running water.
Relocate the filter and carefully screw the
water intake hose onto the tap.
Care and Maintenance...
19