Hotpoint DF56 Dishwasher User Manual


 
Programme Guide...
9
Setting the Wash Programme and
Switching On:
To select the most suitable programme for
the dishes to be washed, refer to the
PROGRAMME TABLE (see next page).
The table shows the most appropriate
programme according to item and degree
of soiling.
After using the table to identify the most
appropriate PROGRAMME SELECTION. Set
the selector (1) to the programme of your
choice by aligning the pointer with the
programme letter.
After loading the dishwasher and choosing
the wash programme:
press the ON/OFF button (2).
Cancelling the current programme:
To cancel the programme in progress,the
programme must be switched off by
pressing the ON/OFF button (2).
Turn the wash programme selector to A:
Prewash and wait for the dishwasher to
start. On completion of the programme,
switch off the dishwasher by pressing the
ON/OFF button (2).
Changing the programme:
To cancel the programme in progress,the
dishwasher must be switched off by
pressing the ON/OFF button (2).
Turn the wash programme selector to the
programme required and switch the dish-
washer on again by pressing the ON/OFF
button (2). The dishwasher will carry out
the new programme automatically.
End of cycle:
At the end of the washing programme the
selector will be on one of the STOP markers,
depending on the programme carried out.
Switch off the dishwasher by pressing the
ON/OFF button (2).
Reference standard
EN 50242
TABLE FOR CERTIFICATION BODIES
Reference programme
(*) Selector on 3
12 place settings
B
30g
Depending on the
Model 3/4 or 4/6
Load
Type of detergent
Amount of detergent
Rinse aid setting
Before starting a wash programme, make
sure that:
The water supply tap is open.
The correct amount of detergent has
been added to the dispenser.
The baskets have been loaded correctly.
The spray arms can rotate freely and
without obstruction.
The dishwasher door is securely closed.