Filter
Top Products
...With the dishes,cutlery,etc.
●
Remnants of food are stuck to the
dishes,cutlery,etc.
- Dishwasher was not loaded
properly.Jets of water could not
reach all parts of the dishes etc.
- Too many items in the rack.
- Items in the rack were touching
each other.
- Not enough detergent was added
to the dispenser.
- Selected wash programme was
not intensive enough.
- Rotation of spray arm was
obstructed by dish,etc.
- Nozzles in spray arm are blocked
by remnants of food.
- Filters are blocked.
- Filters have been incorrectly fitted.
- Waste-water pump is jammed.
●
Plastic items are discoloured
- Not enough detergent was added
to dispenser.
- Detergent has insufficient bleaching
properties.
Use a detergent containing a
chemical bleaching agent.
●
White stains are left on crockery,
glasses have a milky appearance.
- Not enough detergent was added
to input compartment.
- Amount of rinse-aid was set too
low.
- Although water is quite hard,no
salt has been put in appliance.
- Water softener was set too low.
- Lid on salt container is not
screwed tight.
- If you used a phosphate-free
detergent,try a detergent
containing phosphates and
compare results.
●
Dishes,cutlery etc.have not been
dried.
- Selected programme did not
include drying function.
- Amount of rinse-aid was set too
low.
- Items were removed from
dishwasher too soon.
●
Glasses have a dull appearance.
- Amount of rinse-aid was set too
low.
●
Tea stains or traces of lipstick have
not been completely removed.
- Detergent does not have enough
bleaching effect.
- Washing temperature was set too
low.
●
Traces of rust on cutlery.
- Cutlery is not sufficiently rust proof.
- Salt content in washing water is
too high.
- Lid on salt container is not
screwed on tight.
- Too much salt spilt whilst filling the
container.
●
Glasses become clouded and
discoloured;coating cannot be
wiped off.
- Unsuitable detergent was used.
- Glasses are not dishwasher proof.
●
Smears left behind on glasses and
cutlery; glasses have acquired a
metallic appearance.
- Amount of rinse-aid set too high.
24
FP105-01 DWF35/34/33/30 12/02/2002 10:23 am Page 24