Filter
Top Products
10
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
7. During cooking it is always possible to:
- change the temperature by pressing the
button,
followed by the
+
and
-
buttons (manual modes only);
- set the duration of a cooking mode (see Cooking
Modes);
- press the button to stop cooking. In this case the
appliance stores the temperature modified previously
in its memory (manual modes only);
- switch off the oven by pressing the button for 3
seconds.
8. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance
will reactivate the cooking mode from the point at
which it was interrupted, provided that the temperature
has not dropped below a certain level. Programmed
cooking modes which have not yet started will not be
restored and must be reprogrammed (for example: a
cooking mode has been programmed to start at 20:30.
At 19:30 a blackout occurs. When the power supply is
restored, the mode will have to be reprogrammed).
! There is no preheating stage for the GRILL mode.
! Never put objects directly on the bottom of the
oven; this will prevent the enamel coating from being
damaged.
! Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between the
control panel and the oven door, as well as towards the
bottom of the oven door.
! Once cooking has been completed, the cooling fan
continues to operate until the oven has cooled down
sufficiently.
Oven light
The light comes on when the oven door is opened or
when a cooking mode starts.
The
button can be used to switch ons/witch off the
light at any time.
! Do not use the oven lamp as/for ambient lighting
Residual heat indicators
The appliance is fitted with a residual heat indicator.
When the oven is off, the “residual heat” bar on the
display lights up to indicate high temperatures inside
the oven cavity. The individual segments of the bar
switch off one by one as the temperature inside the
oven falls.
Demo mode
The oven can operate in the DEMO mode: all heating
elements are deactivated, and the controls remain
operative.
To activate DEMO mode, switch oven on at power
button
, then buttons
+
and
-
simultaneously for
6 seconds, and then press and release button . A
buzzer sounds and the TEMPERATURE display shows
“dEon”.
To deactivate DEMO mode, when the oven is off press
and hold button
and button
-
simultaneously for
3 seconds. A buzzer sounds and the “dEoF” message
disappears from the display.
Restoring the factory settings
The oven factory settings can be restored to reset all
selections made by the user (clock and customised
durations). To carry out a reset, switch off the oven,
then press and hold the button corresponding to
the first manual cooking mode (top left) and the
button simultaneously for 6 seconds. Once the restore
procedure is complete, a buzzer will sound. The first
time the
button is pressed, the oven will behave as
if it is being switched on for the first time.
Standby
This product complies with the requirements of the
latest European Directive on the limitation of power
consumption of the standby mode. If no buttons are
pressed for 30 minutes and the control panel lock
has not been activated, the appliance automatically
reverts to standby mode. Standby mode is indicated
by the high luminosity “Clock button” light. As soon
as interaction with the machine resumes, the system’s
operating mode is restored.