Hotpoint DX 1032 CX S Double Oven User Manual


 
GB
13
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Practical cooking advice
! Do not place racks in position 1 and 5 during fan-
assisted cooking. This is because excessive direct
heat can burn temperature sensitive foods.
! In the GRILL cooking mode, place the dripping pan
in position 1 to collect cooking residues (fat and/or
grease).
MULTILEVEL
Use positions 2 and 4, placing the food which
requires more heat on 2.
Place the dripping pan on the bottom and the rack
on top.
Programming cooking
! A cooking mode must be selected before
programming can take place.
! In both TOP and MAIN ovens for the manual cooking
programs it is possible to set the cooking time from
00:01 to 23:59.
For the automatic cooking functions the cooking time is
imposed automatically and can be altered only by 5 to
20 minutes, depending on the cooking programme.
Programming the cooking duration
1. Press the
button, until the digits on the display
begin to flash.
2. Press and hold the +/- buttons to set the desired
cooking time.
3. Press the
button- the cooking time will appear on
the display.
4.Press START/STOP button to start cooking
5. When the cooking program has finished the display
wil show the “END” sign.
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking
end time can be scheduled.
! For the delayed programming to work properly, the
clock should be set to the correct time.
1. Follow steps 1 to 3 to set the duration as detailed
above.
2. Press the end cooking icon
and the digitts on the
display begin to flash.
3. Press the “+” and “-” buttons to adjust the cooking
end time value.
4.Confirm the desired cooking end time value by
pressing again the end cooking icon
.
5. Press the
button to activate the programmed
mode.
The DISPLAY shows the cooking end time and the
cooking duration alternately.
6. Once cooking has finished, “END” appears on the
display and a buzzer sounds.
For example: it is 9:00 a.m. and a time of 1 hour
and 15 minutes is programmed, while the end
time is set to 12:30. The programme will start
automatically at 11:15 a.m.
To cancel programming press the
button.