Hotpoint E6005 Cooktop User Manual


 
4
Advice and recommendations
This appliance was designed for non-professional,
household use.
Before using the appliance, read the instructions in the
owner’s manual carefully since it contains all the
instructions you require to ensure safe installation, use
and maintenance. Keep this owner’s manual in a safe place
for future reference.
When you have removed the packing, check whether
the appliance is intact. If you have any doubts, contact a
qualified professional before using the appliance.
Never leave the packing components (plastic bags,
polystyrene foam, nails, etc.) within the reach of children
since these are a source of potential danger.
The appliance must be installed by a qualified
technician in compliance with the instructions provided
by the manufacturer.
The latter denies all responsibility for improper
installation which may harm persons and animals and
damage property.
The electrical safety of this appliance can only be
guaranteed if the latter is correctly and efficiently earthed,
in compliance with regulations on electrical safety. Always
ensure that this vital safety measure has been taken. If
you have any doubts, call in a qualified technician to check
the electrical system thoroughly.
The manufacturer denies all responsibility for damage
resulting from a system which has not been earthed
correctly.
Before powering the appliance, check whether the
technical characteristics featured on the appliance data
plate correspond with those of the mains electrical system.
Check that the current load of the mains supply and of
the power sockets is suitable for the maximum power of
the appliance, indicated on the appliance data plate. If in
doubt, contact a qualified professional.
This appliance must only be used for the purpose for
which it was expressly designed. Any other use (such as
heating a room for example) is considered to be improper
and consequently dangerous.
The manufacturer denies all responsibility for damage
resulting from improper or incorrect use of the appliance.
Certain fundamental rules must be followed when using
electrical appliances. The following are of particular
importance:
First use: the glue used on the hob seals may leave greasy traces on the glass surface. We recommend you wipe these
off before using the appliance, with the aid of a non abrasive cleaner. During the first few hours of use, you may detect
a smell of rubber, which will disappear quickly.
do not touch the appliance with wet or damp hands,
never use the appliance when barefoot,
never use extensions,
never pull on the power supply cable or the
appliance itself to unplug it from the mains socket,
never leave the appliance exposed to atmospheric
agents (rain, sun, etc.),
do not allow children or persons who are not familiar
with the appliance to use it without supervision.
Always unplug the appliance from the mains or switch
off the main switch before cleaning or performing any
cleaning or maintenance operations.
If the surface of the glass cracks, unplug the
appliance immediately. For any repairs, contact only an
authorised after-sales service centre and demand original
spare parts. Failure to comply with the above may com-
promise the safety of the appliance.
Cut the power supply cable after disconnecting it from
the power mains when you decide not to use the appliance
any longer. Also make all potentially dangerous parts of
the appliance safe, above all for children who could play
with the appliance.
The glass ceramic hob is resistant to thermal and
mechanical shocks. However, it may break due to a
shock caused by a sharp object, such as a tool for
example. In this case, unplug the appliance
immediately and contact an authorised after-sales
service centre to have it repaired.
Remember that the heating area stays hot for at least
half an hour after being turned off; please refrain from
placing any cookware or other items on the cooking zone
while still hot.
Do not turn on the heating zones if aluminium foil or
plastic items have been placed on the hob surface.
Do not go near the heating zones when these are still
hot.
If you use small electric appliances near the hob, make
sure their power supply cable does not come into contact
with the hot parts of the hob.
Make sure all pan handles are always pointing inwards
towards the centre of the hob to prevent any accidental
spills.