Filter
Top Products
10
The safety devices
Acoustic signal
Anomalies such as:
• an object (such as a saucepan or a lid, etc.) placed
for more than 10 seconds on the control zone,
• boiled-over liquids or food spilled on the control
zone,
• prolonged pressure on a key,...
could cause a beep to sound and the hob to turn off.
To stop the beep from sounding, remove the cause of the
malfunction.
To use the hob, turn it back on and re-select the cooking
zone(s) you wish to use. Set the desired heating power.
Safety cut out
Your appliance is fitted with a safety cut out which
intervenes after a certain amount of time (see table)
depending on the power setting. When the safety cut out
has intervened, the power display indicates “0”.
for example: the back right cooking zone is set to 5 and
the front left zone is set to 2. The back right zone will turn
off after 4 hours of operation and the front left zone will
turn off after 6 hours of operation.
To unlock the controls, turn the hob off by pressing the
key.
Overheating
Prolonged use of the hob could cause the electronic
components to overheat.
A thermal protection device momentarily sets a reduced
power (setting 3) on the front cooking zones until the
temperature has dropped back down to a suitable level.
Power level
Maximum operating
time in hours
1-2 6
3-4 5
54
6-7-8 1,5
91,5