Hotpoint EG53 Electric Pressure Cooker User Manual


 
PROBLEM CHECK
Ignition does not work.
24
SOMETHING WRONG WITH YOUR COOKER
Before contacting your Service Centre or Installer, check the problem guide
below, there may be nothing wrong with your cooker.
Burner ports Ignitor
Hotplate burner.
I
f all burners fail to ignite:
Check that sparks appear at the burners; a clicking
noise should be heard.
If not...
Check that the electricity supply is turned on.
If the electricity supply has failed,the hotplate
burners can be lit by a match.
I
f only one burner fails to ignite:
Check that the burner is dry and that spillage of food
or cleaning fluid remains are not affecting the ignitor
or burner ports.
Clean away any debris with a dry nylon brush such as
an old toothbrush.If a wire wool pad has been used
for cleaning around the burner ensure the ignitor is
free from any stray strands.Any water on the burner
should be dried with a cloth or kitchen towel.
Make sure that all the burner parts are correctly
seated.