9
Step 3 Press and hold in the Cook Period button.
The display will read 0.00 with the ‘cookpot’symbol lit.
Step 4 With the Cook Period button still held in,set the required Cook Period
using the “+” and “–” buttons.
Release the buttons and the timer display will revert to the time of day with the
‘Auto’symbol and ‘cookpot’symbol lit.
Step 5 Press and hold in the End Time button.
The display will read the earliest possible end time for the Cook Period
that you have set above.
The ‘Auto’symbol and ‘cookpot’symbol will be lit.
Step 6 With the End Time button still held in,use the “+”and “–”buttons to set
the ‘End Time’(i.e.The time you require the oven to switch off).
Release all the buttons and the timer will revert back to the time of day.
The ‘Auto’symbol will remain lit to signify that an Auto Cooking Programme has
been set.The ‘cookpot’symbol will go out.
Step 7 Turn the oven control(s) to the required temperature,and if necessary
select the appropriate oven function.
At the end of the Automatic Cook Period the Auto Symbol will flash and an
intermittent bleeping sound will be heard.
The audible tone will continue unless cancelled.
The ‘Auto’symbol will continue to flash until the timer is returned to Manual
operation (see below).
Step 8 Press the Manual button,the audible tone will be cancelled and the
oven(s) will be returned to Manual.
Step 9 Turn the oven control(s) to the OFF position.
AUTO COOKING PROGRAMMES
There are two Auto Cooking programmes that can be selected using your timer:–
(a) To set the timer to switch the oven(s) On and Off Automatically
(b) To set timer to switch on immediately and OFF automatically after a set cook period.
a) TO SET THE TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY
This allows you to cook at a specified time for a chosen period before the oven switches
off Automatically.
Step 1 Check that the correct time of day is set,if not follow instructions for setting the time of day.
Step 2 Place food onto the correct shelf position in the oven and close the oven door(s).
Timer Operation (EG72)