4
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
DOOR REVERSAL
Warning: Before attempting to remove the doors, switch off the electrical supply and pull out the mains plug.
It is recommended that you remove any loose items/fittings from inside the appliance and place food into insulated
containers whilst carrying out this operation.
You may require assistance to carefully lay the appliance onto its back onto suitable protective materials (i.e. original
packaging).
Remove the doors
1. Lay down the appliance on its
back.
2. Unscrew, remove and retain the
bottom hinge.
3. Slightly open the bottom door
and slide downward remove and
carefully place to one side
4. Remove centre hinge and
spacer if fitted. Slightly open the
top door and slide downwards,
remove and carefully place to one
side.
5.“The pin will be removed and
fixed to the opposite side.
6. Use a thin blunt instrument to
remove the top and bottom hinge
bushes and blanking plugs from
the doors, take care not to mark
the door handle. Reposition the
blanking plugs and bushes on the opposite side.
7. Fit the blanking plugs provided into the right hand two centre hinge holes.
8. Before changing hinge place from right side to left side, screw on left side panel should be disassemblied and
after changing hinge place, screw should be assemblied on right side panel.
Replacing the doors
1. Slide the top door upwards and locate the top hinge pin into the door bush. Reposition the centre hinge on the
opposite side.
2. Carefully slide bottom door upward
into the centre hinge pin.
3. Unscrew the bottom hinge pin and
refit it on the opposite side..
4. Fit the bottom hinge making sure
that the door is aligned to the cabinet.
5. Carefully stand the appliance
upright in it’s required location and
make sure it is sitting level on the floor.
Open and close the doors checking
that the gasket makes a good seal
without any gaps when the doors are
closed.
Note: Replace loose items/fittings
back into the appliance and leave for
at least 15 minutes before switching
back on.