Filter
Top Products
5
D
F
A
B
C
E
A. Gas Burners
B. Pan Support for Cookware
C. Control Knobs for Gas Burners
D. Ignitor for Gas Burners
E. Ignition Button for Gas Burners (only on certain
models)
F. Flame Failure Device - Activates if the flame
accidentally goes out (spills, drafts, etc.), interrupting
the delivery of gas to the burner.
G. Semi Rapid Burner
H. Reduced Rapid Burner
I. Triple Crown Burner
J. Auxilliary Burner
L. Electric Hot Plates (only on certain models)
M. Indicator Light for Electric Hot Plates (only on certain
models) - On those models equipped with electric hot
plates and ignitor, the indicator light is incorporated into
the ignition button.
How To Use Your Hob
Know your Hob
The position of the corresponding gas burner is indicated
on each control knob.
The burners differ in size and power. Choose the most
appropriate one for the diameter of the cookware being used.
The burner can be regulated with the corresonding control
knob by using one of the following settings:
• Off
High
Low
To light a burner, simply press the corresponding knob all
the way in and then turn it in the counter-clockwise direction
to the "High" setting, keeping it pressed in until the burner
lights.
This model is fitted with a safety device (F), the knob
must be pressed in for about 6 seconds until the device that
keeps the flame lighted warms up.
On those models fitted with an ignitor (D), the "E"
ignition button, identified by the symbol, must first
be pressed and then the corresponding knob pushed
all the way in and turned anti-clockwise to the "High"
setting.
To light a burner, simply press the corresponding knob
all the way in and then turn it anti-clockwise to the
"High" setting, keeping it pressed in until the burner
lights.
Caution: If the burner accidently goes out, turn off the gas
with the control knob and try to light it again after waiting at
least 1 minute.
To turn off a burner, turn the knob in the clockwise direction
until it stops (it should be on the “•” setting).
G
H
J
I
A
B
C
E
1
2
3
4
5
6
G
H
L
M