Hotpoint HDA1OOOK Dishwasher User Manual


 
Care and CleatiW
USER
M~TENNCE
~STRUCTIONS
Clean the control panel with a
lightly dampened cloth.
Dry
thoroughly. Do not use abrasives
or sharp objects on the panel.
They can damage it.
Clean the outside with a good
appliance polish wax.
The outside
cabinet finish is durable, but it can
scratch. So use no scouring pads,
or harsh or gritty cleaners.
Appliance Polish Wax & Cleaner
(Cat. No.
WRWX216)
is available
from
Hotpoint
Appliance Parts
Marts.
The inside usually takes care
of itself.
If it should ever need
cleaning, use a mild cleansing
powder. Scouring pads and harsh
cleaners can mar the finish.
Built-in
dkhwmhem
often
mean
air gap.
&pit
clean.
An air gap is a plumbing device.
It protects your dishwasher against
water backing up into it if a drain
clogs. The air gap is not a part of
the dishwasher. And you may not
even have one. Not all plumbing
codes require air gaps.
-
.
.
-“
-
If you have an air gap, check it
at least once a month. IT IS
N~
PART OF YOUR DISHWASHER.
IT IS
N~
COVERED IN YOUR
WARRANTY.
The air gap is easy to clean.
With most types, first turn off the
dishwasher, then lift off the chrome
cover. Then unscrew the plastic cap
and check for any buildup of grit.
A toothpick makes cleaning easy.
Check the air gap any time your
dishwasher isn’t draining
well.
Not
wing
your
dkhwasher
in winter?
~tect
against
freezing.
If your dishwasher is left in an
unheated place during the winter,
ask a service technician to:
. Cut off electric power to the
dishwasher. Remove fuses or trip
circuit breaker.
Turn off the water supply.
Disconnect the water inlet line
from the water valve.
Drain water from the inlet line
and water valve. (Use a pan to
catch the water.)
Reconnect the water inlet line to
the water
valve.
Remove the plug in the bottom of
the rubber boot. Drain completely,
then reinstall
plug
and clamp.
Drain the collection chamber
at rear of unit below
filter
by
disconnecting hose to pump.
Reconnect after draining.
14