Filter
Top Products
~
m
Questions?
~
Use This
fioblem
Solver
~
PROBLEM POSSIBLE CAUSE AND REMEDY
DIS~ASHER
A fuse in your home maybe blown, or the circuit breaker
trippd.
Replace fise
or reset
WON’T RUN
circuit breaker. Remove any other appliances from the circuit.
UNUSUAL NOISE
Utensils may not be secure on rack pins. Or something small may have dropped from
the rack. Water is causing utensils to rattle. Make sure everything is securely
placed
in dishwasher.
DISHES DON’T DRY
Make sure inlet water temperature is correct. (See page 6.)
Unload the bottom rack first. Water from dishes in the top rack maybe spilling into the
bottom rack.
Check for improper loading. Dishes shouldn’t nest together. Avoid overloading.
UNCLEAN DISHES
Check inlet water temperature. It should be at least
120°F.
(To test,
S*
page 6.)
AND FLATWARE
To obtain the benefits of a complete cycle, be careful that you
do not turn the
did
any
further than necessary
to start the dishwasher.
Water pressure may be temporarily low. Turn on a
fiucet.
Is water coming out slower than
usual? If so, wait until pressure is normal before using your dishwasher.
Plugged
air
gap. (See page 11.)
Improper rack loading. (See pages 8-9.)
BLACK OR GRAY
Aluminum deposits often leave marks when they rub against other things.
Wmove
marks
MARKS ON DISHES
with a mild abrasive cleanser.
DETERGENT LEFT
Water may not be reaching the detergent cups. Move dishes
hat
maybe blocking
~
DISPENSER CUPS
detergent cup.
The dispenser cover may not be opening or may be
blockd
by improperly
loadti
items.
If you used a powder detergent, open the cup and remove any caked-on detergent. If
the
cup still doesn’t open automatically, call for service.
Detergent may be old. If the powder detergent is hard or caked
in
the box, throw it away.
The detergent may not be working well. Try another
brmd.
12