Filter
Top Products
How to
opemte
your Whmsher
Door Latch Cycle Indicator Dial
(Locked)
(Turn
tq
Start)
II
I
\
STEP 1.
Load your dishwasher
with dishes, silverware, pots,
pans, bowls, etc. according to
instructions on pages 8 and 9.
STEP 2.
Add detergent to the
detergent dispenser.
Mde
sure
the Cycle Indicator Dial is at OFF
position before adding detergent.
(See pages 6 and 7.)
Use rinse aid agent to help prevent
spotting. (See page 6.)
STEP 3.
Select DRYING HEAT
option. It must be ON for PLATE
WARMER cycle, OFF for
~NSE
HOLD cycle.
It
can be ON or OFF,
at your option (see below), for any
of the wash cycles,
POTS
NORMAL
PANS
WASH
ON: Turns the drying heater on for
fast drying.
OFF: Turns the drying heater off
to save energy. Dishes will dry
naturally over a longer period
such as overnight.
If you need your dishes sooner,
open the dishwasher door after the
cycle is complete to reduce the
natural drying time.
Use of this option reduces the
electrical energy used by this
model approximately 10% for
the NORMAL WASH cycle.
STEP 4.
Select the cycle and start
the dishwasher.
If your dishwasher drains into a
food waste disposer, operate the
disposer until it is empty before
starting the dishwasher. (See Cycle
Selection Hints at right.)
To obtain the benefits of a
complete
cycle, be careful that you
do not
turn the dial any further than
neeessary
to start the dishwasher.
. Form & PANS and
NO~AL
WASH cycle:
DRYING
HEAT
ON
OFF
a. Push selected cycle button.
b,
Latch the door.
LIGHT
WASH
●
ON
●
e
OFF ● ●
, ● RINSE & HOLO
DRYING
●
ORYPLATE
WARMER
c. Slowly turn Cycle Indicator Did
to ON position to start the cycle.
You will hear the motor start.
There is a time delay between
start-up and water fill so you will
not hear any wash action right
away.
. For LIGHT
WMH
cycle:
a.
Be sure door is unlatched.
b. Push NORMAL WASH cycle
button.
LIGHT
WASH
●
ON
●
IQ
OFF
●
●
●
RINSE & HO1O
ORYING
●
ORWPLATE
WARMER
c. Slowly turn Cycle Indicator Dial
to LIGHT WASH position.
d. Latch door to start the cycle.
●
For
~NSE
HOLD cycle:
a.
Be sure door is unlatched.
b. Select DRYING HEAT-OFF
drying option.
LIGHT WASH
●
ON
●
OFF
●
~e
●
●
RINSE& HOLO
ORYING
●
DRYIPLATE
WARMER
c. Slowly turn Cycle Indicator Did
to
NNSE
HOLD position.
d. Latch the door to start the cycle.
4