Hotpoint HDA959M Dishwasher User Manual


 
For PLATE WARMER cycle:
a. Load clean plates and dishes to
be warmed.
b. Select DRYING HEAT–ON
drying option.
c.
have
the door unlatched.
ON
RINSE &
HOLD
OFF
ORYI
YIPLATE WARMER
d. Slowly turn Cycle Indicator Dial
clockwise to PLATE WARMER
position.
e. Latch the door to start the cycle.
What happens in each cycle
You’ll hear occasional clicking
sounds:
—Soft food disposer shredding
action.
—Drain valve opening to pump
water out.
—Timer control as cycle
progresses.
—Detergent cup opening.
Wash
Cycles
Pm&
PANS
NORMAL WASH
LIGHT WASH
RINSE HOLD
Cycle selection hints
It is important to follow the loading
instructions on pages 8 and 9.
POTS & PANS—For items such as
pots, pans, cookware, dishes and
glasses with heavy soil. Everyday
dishes may be included.
NORMAL WASH—For most
loads of everyday dishes, glasses
and cookware with medium soils.
LIGHT WASH—For dishes
that have been
pre-rinsed
before
loading. Also, for washing very
lightly
soiled dishes with soils
that have not dried on.
During the drying period:
—The motor stops.
—Water vapor comes through
the vent under the door latch
during drying and when water
is being circulated.
RINSE HOLD–For rinsing
partial loads which will be washed
later. Select DRYING HEAT–
OFF drying option.
Do
not
use
detergent.
PLATE WARMER—For warming
clean dishes and serving plates for
the serving of hot food.
Minimum
Wash
Water Use
Cycle Time
Gallons
(approx.
(approx.)
minutes)
Cycle Sequence
12,9
44*
lREl[..-I””:l[E
il[R~E~E3131
‘ash/
Rinse Rinse
11.0
9.5
44*
44*
“Wa;<i
Rinse
*WATER TEMP BOOST—ON: The timer will not advance until water reaches proper temperature.
(See WATER TEMP BOOST option on page 4.)
*DRYING HEAT—ON: Add 22 minutes.
5