Hotpoint HHC6.7AB Ventilation Hood User Manual


  Open as PDF
of 16
 
10
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
CHIMNEY controls
Models with mechanical keypad
(Only available in certain models)
T1 T2 T3 T4 T5
T1 Motor reset
Pressing the button while the hood is in operation turns it
OFF.
T2 Speed 1
Pressing the button sets the hood to speed 1.
T3 Speed 2
Pressing the button sets the hood to speed 2.
T4 Speed 3
Pressing the button sets the hood to speed 3.
T5 Lights ON/OFF
Models with soft button keypad
HHC6.7AB
HHC9.7AB
HHC7.7AB
T1 T2 T3 T4 T5
B
T6
T1 Motor reset
Pressing the button while the hood is in operation turns it
OFF.
T2 Speed 1
Pressing the button sets the hood to speed 1.
T3 Speed 2
Pressing the button sets the hood to speed 2.
T4 Speed 3
Pressing the button sets the hood to speed 3.
T5 Booster
Pressing the button sets the hood to high speed. After 5
minutes, the hood returns to the previous speed; pressing
a speed button (T2, T3 or T4) quits booster mode and sets
the selected speed.
T6 Lights ON/OFF
Grease/odour lter warnings
The T2iconashestoindicatethatthegreaselteris
saturated, while T3ashestoindicatethattheodourlter
issaturated,andifbothareashingthenbothltersare
saturated.Youmustthenclean/replacethegreaselter(A)
orodourlter(B)orboth,accordingly(see“Maintenance
andcare”).
To reset the lter counter:
Hold down T4 for three seconds while the hood is on.
Thewarningledashesthreetimes,thenreturnstoits
normalmodeIfbothlterwarningsareactiveatthesame
time, you must reset each separately.
Therstsequenceresetsthegreaselter,whilethesecond
sequenceresetstheodourlter.
Models with soft button keypad and display
(Only available in certain models)
T1 T2 T3 T4 T5 T6
B
1 Motor ON/OFF
Press the button with the hood off to set speed 1. Pressing
thebuttonwhilethehoodisinoperationturnsitOFF.
T2 Speed -
Pressing the button returns the hood to the previous speed.
T3 Speed +
Pressing the button returns the hood to the next speed. If
the hood is off, pressing these buttons sets speed 1.
T4 Booster
Pressing this button sets the hood to high speed; the letter
"b"ashesslowlyonthedisplay.After5minutes,thehood
returns to its previous speed; this can also be done while
booster mode is on by pressing either speed button (T2
or T3).
T5 Timer
Pressing this button delays the hood turning off automatically
by 5 minutes. The timer counts down on the display in
minutes. The timer can only be set for manual speeds, not
for booster mode.
T6 Lights ON/OFF
Hood confi guration:
To set the operating mode of the hood, hold down T5 for 6
seconds while the product is off. Icons T2 or T3 will light up
to show the type of installation: T2 ventilation, T3 fi ltering.
You can change the type of installation by pressing T4
cyclically.
To save the new confi guration press T1 individually.
 previous next