Hotpoint HXQB9.8LTI Ventilation Hood User Manual


  Open as PDF
of 20
 
GB
11
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
TBOX-GLASS controls
Models with Touch control glass (basic)
HXQB9.8LTI
T1 T2 T3 T4 T5 T6 T7 T8
T1 motor ON/OFF
Whenthebuttonispressedwiththehoodoff,therstspeed
is set. When the button is pressed during operation, the
hoodswitchesOFF.
T2 Speed 1
When the button is pressed the hood switches from the
previous status to speed 1.
T3 Speed 2
When the button is pressed the hood switches from the
previous status to speed 2.
T4 Speed 3
When the button is pressed the hood switches from the
previous status to speed 3.
T5 Booster
When the button is pressed the hood switches from the
previous status to intense speed. The setting is limited by
time; when the time elapses the hood goes back to the speed
set previously; when a speed button is pressed (T2, T3 or
T4), the selected speed is set as you leave the booster mode.
T6 Timer
By pressing T6 once, a timer setting can be associated to each
speed, after which the hood turns OFF automatically. The timer
can be set for manual speeds only and not for the booster.
T7 Antigrease and odour lter signal
The antigrease (A) and odour (B)ltersneedcleaning/
replacing after a certain number of hours of use (the latter
forlteringhoodsonly).
The time for cleaning/replacement is signalled by the
ashingofthecolouredLEDassociatedtothelter(white
forantigreaselters,redforodourlter).
TheLEDisturnedoffbypressingtheT7 button after
cleaning/replacingthelters.
T8 lights ON/OFF
It turns the work lights of the hood on and off.
Hood conguration
Thecongurationmenuisaccessedwiththeproductoff
by pressing T5 and T6 for 6 seconds. T7 turns on at this
point to indicate the type of installation through two colours
oftheLED:whiteforextractorinstallation(default),redfor
lteringinstallation.Theinstallationtypecanbechanged
by pressing T7 cyclically with the consequent alternation
oftheLEDcolours.
Hood off
The hood can be turned off manually by pressing the T1
button (ON/OFF). If the timer is set, the hood turns off
automatically when the set time runs out.
Models with Touch control glass + display
(medium)
(Only available in certain models)
T1 T2 T3 T4 T5 T6
T1 motor ON/OFF
Whenthebuttonispressedwiththehoodoff,therstspeed
is set. When the button is pressed during operation, the
hoodswitchesOFF.
T2 Speed –
When the button is pressed the hood switches to the
previous speed.
T3 Speed +
If the hood is set to speed 3, the intensive speed activates
when this button is pressed
The setting is limited by time; when it elapses the hood goes
back to the speed set previously.
T4 Timer “–”
Set a time to turn OFF the hood with the timer; if the timer
is set and the speed is subsequently changed by pressing
T2, T3 or T4, the timer is deactivated.
Press T4 to decrease the timer by 5 minutes.
T5 Timer “+”
Whenthebuttonispressedforthersttime,thetimerisset
to 5 minutes; this value is increased by 5 additional minutes
every time the button is pressed after that.
T6 lights ON/OFF
It turns the work lights of the hood on and off
D1I1 D2 I5
I2 I4
D1: DGT Speed
D2: Assembly of 2 DGT Time
I1:GreaseFilterIndicator
I2:CarbonFilterIndicator
I4: Menu Indicator
I5: Timer Indicator
 previous next