Hotpoint HXQB9.8LTI Ventilation Hood User Manual


  Open as PDF
of 20
 
GB
13
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
- Manual calibration: (or upon request) is set in the
congurationmenu.Thisprocedureisadvised,andmay
be started, in case of malfunctioning of the sensor (which,
for example, may occur in case of blackout while cooking
or after a long time since the use).
Forthemanualcalibration,proceedwiththestepsbelow:
• withthehoodOFF or in standby, the menu is accessed
by pressing the T6 and T7 buttons for a prolonged
time; this is signalled by a sound emitted by the hood
and by the I4 icon lighting up and the writing C1-0
appearing on the display;
• usethebuttonsT6 and T7 to go through the menu.
UseT6 to go through the various menu items (C1, C2,
C3, C4, etc) and T7 to select them (0, 1 or 0, 1, 2);
• forthemanualcalibration,accessthemenu,select
item C4 with T6 and set value 1 with T7. Then press
T1 and wait for the time suggested for the calibration.
Selecting the hob type: the type of hob (electric, induction,
gas) present under the hood is select upon installation. A
complete automatic calibration procedure is carried out
immediately after selecting the hob.
Important: do not force the calibration “upon request”
after selecting the hob as this activates automatically.
To select the hob, proceed as follows:
• withthehoodOFF or in standby, the menu is accessed by
pressing the T6 and T7 buttons for a prolonged time; this is
signalled by a sound emitted by the hood and by the I4 icon
lighting up and the writing C1-0 appearing on the display;
• usethebuttonsT6 and T7togothroughthemenu.Use
T6 to go through the various menu items (C1, C2, C3,
C4, etc) and T7 to select them (0, 1 or 0, 1, 2);
• toselectthehob,accessthemenu,selectitemC3 with
T6 and set the value with T7 to 0 if you have a gas hob,
1 if you have a radiant hob and 2 if you have an induction
hob. Press T1 to leave the menu mode and wait the time
needed for the sensor calibration.
Hood type setting
Thehoodcanbesetintheventilation(default)andltering
operating mode. To change the type proceed as follows:
• withthehoodOFF or in standby, the menu is accessed by
pressing the T4 and T5 buttons for a prolonged time; this is
signalled by a sound emitted by the hood and by the I4 icon
lighting up and the writing C1-0 appearing on the display;
• usethebuttonsT4 and T5togothroughthemenu.Use
T4 to go through the various menu items (C1, C2, C3,
C4, etc) and T5 to select them (0, 1 or 0, 1, 2);
• tosetthehoodtype,accessthemenu,selecttheitem
C6 with T4 and set the value 0 with T5 to set the hood on
ventilation mode or 1forthelteringmode.ThenpressT1.
Hood off
The hood can be turned off manually by pressing the T1 button
(ON/OFF). If the hood stays on in manual mode, it turns off
automaticallyafteracertain“safety”time.Ifthetimerisset,
the hood turns off automatically when the set time runs out.
The Automatic mode activates after 10 minutes from the
sensor turning off the hood motor.
Conguration table
Regulation
code
Meaning Explanation
C1 Greaseltertimer
It resets the grease
ltertimer
C2 Odourltertimer
Itresetstheodourlter
timer
C3 Hob type
It changes the hob type
fortheAUTOsensor.It
may be gas, electric or
induction
C4 Sensor calibration
It calibrates the sensor.
If item 1 is select, the
sensor carried out the
calibration the next
time the hood is turned
on
C5 Audio levels
Ifmute,noFBaudiois
emitted (not even when
turningON)
C5 Hood type
Ventilation/Filtering
(Ventilationbydefault)
C6
ResettoFactory
default
It resets the DGT menu
values to default values
(including installation)
General notes
If the display buttons become locked, unplug and plug
in again the hood from the mains before contacting the
Assistance Service.
Maintenance and care
Caution! Before cleaning or servicing the unit,
disconnect it from the mains by pulling the power plug
or disconnecting the main circuit breaker.
First cleaning
• Removetheprotectivelm
• Cleanwithadampspongeandalittleneutralsoap
• Rinseoffwithadampcloth
• Drywithasoftcloth;ifthehoodisstainlesssteel,dry
alongthemetal'sgrain
Periodic cleaning
The hood must be cleaned frequently (at least as often as
youservicethegreaselter),insideandout.Useadamp
cloth and a neutral liquid detergent with lukewarm water.
Do not use abrasive or corrosive products.
Warning:Failuretoobservethehoodcleaningandlter
cleaning/replacementinstructionscanresultinres.Follow
the instructions carefully. The manufacturer is not liable for
anydamagetothemotororrescausedbyincorrectcare
or failure to follow the above instructions.
 previous next