Filter
Top Products
8
Selecting types of cookware.
*745>;;>F8=68=5>A<0C8>=F8;;74;?H>D27>>B42>>:F0A4F7827F8;;68E46>>3?4A5>A<0=24>=6;0BB2>>:C>?B
Stainless Steel:
A42><<4=343
Aluminum:
740EHF4867CA42><<4=343
Good conductivity. Aluminum residues
sometimes appear as scratches on the
cooktop, but can be removed if cleaned
immediately. Because of its low melting
point, thin-weight aluminum should not
be used.
Copper Bottom:
A42><<4=343
Copper may leave residues which can
appear as scratches. The residues can be
removed, as long as the cooktop is cleaned
immediately. However, do not let these pots
boil dry. Overheated metal can bond to glass
cooktops. An overheated copper bottom pot
will leave a residue that will permanently
stain the cooktop if not removed
immediately.
Porcelain Enamel Covered Cast Iron:
A42><<4=343
As long as the cookware is covered
completely with porcelain enamel, this
cookware is recommended. Caution is
recommended for cast-iron cookware
that is not completely covered with smooth
porcelain enamel, as it may scratch the
glass-ceramic cooktop.
Glass-ceramic:
DB01;41DC=>CA42><<4=343
Poor performance. May scratch the surface.
Stoneware:
DB01;41DC=>CA42><<4=343
Poor performance. May scratch the surface.
Home Canning Tips:
Be sure the canner is centered over the
surface unit.
Make sure the canner is flat on the bottom.
Use recipes and procedures from
reputable sources. These are available
from manufacturers such as Ball
®
and
Kerr
®
and the Department of Agriculture
Extension Service.
To prevent burns from steam or heat, use
caution when canning.
Check pans for flat bottoms by
using a straight edge.
Pans with rounded, curved,
ridged or warped bottoms are
not recommended.
Wok Cooking
-4A42><<4=3C70CH>DDB4>=;H05;0C
1>CC><43F>:*74H0A40E08;01;40CH>DA
;>20;A4C08;BC>A4
Do not use woks that have support rings. Use
of these types of woks, with or without the
ring in place, can be dangerous.
Placing the ring over the surface unit will
cause a buildup of heat that will damage
the porcelain cooktop. Do not try to use such
woks without the ring. You could be seriously
burned if the wok tips over.
Use only flat-bottomed woks.
Use medium- or heavy-weight cookware.
Aluminum cookware conducts heat faster
than other metals. Cast-iron and coated
cast-iron cookware are slow to absorb heat,
but generally cook evenly at low to medium
heat settings. Steel pans may cook unevenly
if not combined with other metals.
For best cooking results, pans should be
flat on the bottom. Match the size of the
saucepan to the size of the surface unit.
The pan should not extend over the edge
of the surface unit more than 1 inch.
Not over 1 inch
1″
*745>;;>F8=68=5>A<0C8>=F8;;74;?H>D27>>B42>>:F0A4F7827F8;;68E46>>3?4A5>A<0=24>=2>8;2>>:C>?B
Surface Cookware Tips
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions