Hotpoint LTF 11S112 Dishwasher User Manual


  Open as PDF
of 20
 
10
GB
Unsuitable crockery
• Woodencrockeryandcutlery.
• Delicatedecoratedglasses,artistichandicraftandantique
crockery. Their decorations are not resistant.
• Partsinsyntheticmaterial whichdo notwithstandhigh
temperatures.
• Copperandtincrockery.
• Crockerysoiledwithash,wax,lubricatinggreaseorink.
Thecoloursofglassdecorationsandaluminium/silverpiecescan
change and fade during the washing process. Some types of
glass (e.g. crystal objects) can become opaque after a number
of wash cycles too.
Damage to glass and crockery
Causedby:
•Typeofglassandglassproductionprocess.
•Chemicalcompositionofdetergent.
•Watertemperatureofrinsecycle.
Tips:
•Onlyuseglassesandporcelainguaranteedbythe
manufacturer as dishwasher safe.
•Useadelicatedetergentsuitableforcrockery.
•Collectglassesandcutleryfromthedishwasherassoonas
the wash cycle is over.
* Onlyavailableinselectedmodels.
Third rack
The third rack was designed to house the cutlery. Arrange the
cutlery as shown in the figure.
“Knives and other utensils with sharp edges must be
positioned with the blades facing downwards.”
A separate arrangement of the cutlery makes collection easier
after washing and improves washing and drying performance.
The geometry of the rack makes it possible to place such small
items as coffee cups in the area in the middle.
The third basket is equipped with two sliding side trays to make
the most of the height of the space below.
The upper rack can be adjusted for height based on
requirements: high position to place bulky crockery in the lower
rackandlowpositiontomakethemostofthetip-updispensers/
sectors by creating more space upwards.
Adjusting the height of the upper rack
In order to make it easier to arrange the crockery, the upper rack
may be moved to a higher or lower position.
The height of the upper rack should be adjusted WHEN THE
RACK IS EMPTY.
NEVER raise or lower the rack on one side only.
If the rack is equipped with a Lift-Up device*
(see figure)
, lift
it up by holding its sides. To restore the lower position, press
the levers (A) at the sides of the rack and follow the rack down.
The upper rack cannot be used in the high position and
with the tip-up compartments closed in a vertical position.
 previous next