Hotpoint OS897D P/HP S Double Oven User Manual


 
GB
5
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Installation
! Please keep this instruction booklet in a safe place for
future reference. If the appliance is sold, given away or
moved, please make sure the booklet is also passed on to
thenewownerssothattheymaybenetfromtheadvice
contained within it.
! Please read this instruction manual carefully: it contains
important information concerning the safe operation,
installation and maintenance of the appliance.
Positioning
!Donotletchildrenplaywiththepackagingmaterial;it
should be disposed of in accordance with local separated
waste collection standards (see Precautions and tips).
!Theappliancemustbeinstalledbyaqualiedprofessional
in accordance with the instructions provided. Incorrect
installation may damage property or cause harm to people
or animals.
Built-in appliances
Use an appropriate cabinet to ensure that the appliance
operates properly:
• Thepanelsadjacenttotheovenmustbemadeofheat-
resistant material.
• Cabinetswithaveneerexteriormustbeassembledwith
glues which can withstand temperatures of up to 100°C.
• Toinstalltheovenunder the counter (see diagram) or
in a kitchen unit, the cabinet must have the following
dimensions:
595 mm.
595 mm.
24 mm.
545 mm.
5 mm.
576 mm.
23 mm.
593 mm.
45 mm.
558 mm.
547 mm. min.
! The appliance must not come into contact with electrical
parts once it has been installed.
The indications for consumption given on the data plate
have been calculated for this type of installation.
Ventilation
To ensure adequate ventilation, the
back panel of the cabinet must be
removed. It is advisable to install
the oven so that it rests on two
strips of wood, or on a completely
atsurfacewithanopeningofat
least 45 x 560 mm (see diagrams).
560 mm.
45 mm.
min. 20 mm
min. 45 mm
FAN ASSISTED
MODE
Centring and xing
Position the 4 tabs on the side of the oven so that they are
linedupwiththe4holesontheouterframe.Adjustthe
tabs according to the thickness of the cabinet side panel,
as shown below:
20 mm thick: take off the removable
partofthetab(seediagram).;
18mmthick:usetherstgroove,
which has already been set in the
factory (see diagram).
16 mm thick: use the second
groove (see diagram).
Secure the appliance to the cabinet by opening the oven
door and putting 4 screws into the 4 holes on the outer
frame.
! All parts which ensure the safe operation of the appliance
must not be removable without the aid of a tool.
Electrical connection
Ovens equipped with a three-pole power supply cable are
designed to operate with alternating current at the voltage
and frequency indicated on the data plate located on the
appliance (see below).