Filter
Top Products
7
Using the surface units.
ge.com
Throughout this manual, features and appearance may vary from your model.
Push the knob in and turn in either
direction to the setting you want.
At both OFF and HI the control clicks
into position. You may hear slight clicking
sounds during cooking, indicating the
control is keeping the power level you set.
A HOT SURFACE or HOT COOKTOP
(depending on model) indicator light will
glow when any radiant element is turned
on and will remain on until the surface is
cool enough to touch.
A SURFACE UNIT on or BURNER ON
(depending on model) indicator light will
glow when any surface unit is on.
NOTE: The SURFACE UNIT on indicator light may
glow between the surface control settings of LO
and OFF, but there is no power to the surface units.
Operating
Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting Tips
Safety Instructions
Consumer Support
Be sure you turn the control knob
to OFF when you finish cooking.
How to Set Indicator Lights (on radiant glass models only)