Hotpoint RLA50 Refrigerator User Manual


 
15
CLEANING &
MAINTENANCE
Door Reversal
Note : You may require assistance to do this:
23. Place the top hinge onto the door, slide the door onto the
bottom hinge pin and support the door whilst screwing the top
hinge bracket into position.
Ensure that the top hinge bracket is positioned correctly.
24. Adjust the front feet (see ‘Levelling’SAFETY & INSTALLATION section).
25. Fit the bottom hinge covers (see ‘Hinge Covers’in the SAFETY &
INSTALLATION section).
Note : Let the appliance stand upright in it’s final location for at least 15
minutes before plugging in and switching on the electricity supply.
Door Handle Reversal:
Note: this MUST be completed with the door OFF the product.
16. Remove the hole plugs from the right hand side of the door.
17. Unscrew the handle cover retaining screws and remove the covers.
18. Unscrew the handle fixing screws and remove the handle from the door.
19. Turn the handle vertically, top to bottom and place it in position against the
right hand side of the door.
20. Secure the handle in place with the original fixing screws.
21. Fit the handle covers in position, using the original retaining screws.
22. Use the hole plugs removed from the right hand side to fill holes on the left.
14. Using a thin blunt instrument,remove the hinge
bush cap from the top left of the door and refit on
the top right.
15. Use a screwdriver to remove the door stop from the
bottom right of the door and refit on the bottom
left.
door stop