Hotpoint SBS 638 CX S Range User Manual


 
GB
9
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
The electronic programmer*
DISPLAY
SET TIME
button
END OF
COOKING icon
CLOCK icon
DURATION
icon
TIMER icon
DECREASE TIME
button
INCREASE TIME
button
•• ••
Setting the clock
! The clock may be set when the oven is switched off or when it is switched
on, provided that a the end time of a cooking cycle has not been programmed
previously.
After the appliance has been connected to the mains, or after a blackout, the
icon and the four numerical digits on the DISPLAY will begin to ash.
1. Press the button several times until the icon and the four digits on
the display begin to ash.
2. Use the “+” and “-” buttons to adjust the time; if you press and hold either
button, the display will scroll through the values more quickly, making it quicker
and easier to set the desired value.
3. Wait for 10 seconds or press the button again to nalise the setting.
Setting the timer
! This function does not interrupt cooking and does not affect the oven; it is
simply used to activate the buzzer when the set amount of time has elapsed.
1. Press the button several times until the icon and the three digits
on the display begin to ash.
2. Use the “+” and “-” buttons to set the desired time; if you press and hold
either button, the display will scroll through the values more quickly, making
it quicker and easier to set the value.
3. Wait for 10 seconds or press the button again to nalise the setting.
The display will then show the time as it counts down. When this period of
time has elapsed the buzzer will be activated.
Programming cooking
! A cooking mode must be selected before programming can take place.
Programming the cooking duration
1. Press the button several times until the icon and the three digits
on the DISPLAY begin to ash.
2. Use the “+” and “-” buttons to set the desired duration; if you press and hold
either button, the display will scroll through the values more quickly, making
it quicker and easier to set the value.
3. Wait for 10 seconds or press the button again to nalise the setting.
4. When the set time has elapsed, the text END appears on the DISPLAY,
the oven will stop cooking and a buzzer sounds. Press any button to stop it.
For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is
programmed. The programme will stop automatically at 10:15 a.m.
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking end time can be scheduled.
1. Follow steps 1 to 3 to set the duration as detailed above.
2. Next, press the button until the icon and the four digits on the
DISPLAY begin to ash.
3. use the “+” and “-” buttons to adjust the cooking end time; if you press
and hold either button, the display will scroll through the values more quickly,
making it quicker and easier to set the desired value.
4. Wait for 10 seconds or press the button again to nalise the setting.
5. When the set time has elapsed, the text END appears on the DISPLAY,
the oven will stop cooking and a buzzer sounds.Press any button to stop it.
Programming has been set when the and buttons are illuminated. The
DISPLAY shows the cooking end time and the cooking duration alternately.
For example: It is 9:00 a.m. and a duration of 1 hour has been programmed.
12:30 is scheduled as the end time. The programme will start automatically
at 11:30 a.m.
Cancelling a programme
To cancel a programme:
press the button until the icon corresponding to the setting you wish
to cancel and the digits on the display are no longer ashing. Press the
“-” button until the digits 00:00 appear on the display.
Press and hold the “+” and “-” buttons; this will cancel all the settings
selected previously, including timer settings.
* Only available in certain models.