12
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Programming the automatic cleaning end time
1. Press the
button until the icon and the two
digitsontheDISPLAYbegintoash.
2. Turn the TIMER KNOB towards “ ”and“ ”toadjustthe
hour value.
3. Press the
button again until the other two digits on
theDISPLAYbegintoash.
4. Turn the TIMER KNOB towards “ ”and“ ”toadjustthe
minute value.
5. Press the
buttonagaintoconrm.
6. When the set time has elapsed, the text END appears on
the display and a buzzer sounds.
• Forexample:itis9:00a.m.andtheEconomy(ECO)
FAST CLEAN level has been selected, with the default
duration of 1 hour. 12:30 is scheduled as the end time.
The programme will start automatically at 11:30 a.m.
Programming has been set when the
and
buttons are illuminated. The display shows the FAST CLEAN
end time and duration alternately.
Once the automatic cleaning cycle is over
You will have to wait until the temperature inside the oven
hascooleddownsufcientlybeforeyoucanopentheoven
door. You will notice some white dust deposits on the bottom
andthesidesofyouroven;removethesedepositswitha
damp sponge once the oven has cooled down completely.
Alternatively, you can make use of the already heated oven,
in which case it is not necessary to remove the deposits,
they are completely harmless and will not affect your food
in any way.
Troubleshooting
Problem
Possible cause
Solution
The appliance has just been
connected to the electricity
mains or there has been a blackou
Set the clock.
A programmed cooking mode
does not start.
There has been a blackout. Reprogram the cooking mode.
Only the high luminosity
“Clock button” is lit.
The appliance is in standby mode Press any button to exit
standby mode.
Fan-assisted cooking has been
selected and the food looks burnt.
Positions 1 and 5: the direct
heat could cause
temperature-sensitive
foods to burn.
We recommend switching
dripping pan positions halfway
through cooking.