Filter
Top Products
2
GB
Installation
Flush fitting
The oven can be installed under a work top or in a
cooking column. Figure shows the installation
dimensions. Make sure that surrounding materials are
heat resistant. Align the oven centrally with respect to
the sidewalls of the units surrounding it and fix it in
place with the screws and Allen screws provided.
See the accompanying instructions for combining
the oven with multi-functional gas or gas-electric
cookers.
Electrical connection
Before connecting the oven to the mains power
supply, make sure that:
• The supply voltage corresponds to the
specifications on the data plate on the front of the
oven.
• The mains supply has an efficient earth (ground)
connection complying with all applicable laws and
regulations. Correct earthing (grounding) is a legal
requirement. The power cable should never reach a
temperature 50°C above ambient temperature at
any point along its length. If a fixed appliance is not
provided with a power cable and plug, or some
other device permitting it to be disconnected from
the mains electricity supply, with a gap between the
contacts big enough to guarantee class III over
voltage protection, then such a device must be
fitted to the power supply incompliance with the
regulations governing electrical installations. The
socket or switch must be easily reachable with the
oven fully installed.
N.B. The manufacturer declines all responsibility for
damage or injury if the above instructions and normal
safety precautions are not respected.
IMPORTANT
The oven's data plate is accessible even with the oven
fully installed. The plate is visible simply by opening
the door. Always quote the details from it to identify
the appliance when ordering spare parts.