Hotpoint WE26 Beverage Dispenser User Manual


 
Removing the wooden shelves
Follow the instructions below to remove the wooden
shelves:
1. Hold the front part of the shelf with one hand.
2. With the other hand push the back of the shelf
upward.
3. Slowly remove the shelf by pulling it toward you. Pull
out the shelf by 1/3 of the way if you need to remove
or replace bottles.
4. Remove or replace the bottles you need and push
the shelf back, making sure it locks into place.
5. Make sure the shelf is in place by trying to pull it out
once again. If it moves, push it back in again until it is
securely in place.
To completely remove the shelf, follow step 1 and 2
and remove all bottles that on the shelf. Slowly pull the
shelf toward you until you remove it from its slots.
! Do not, under any circumstances, remove more than
one shelf at a time.
For a small number of bottles
If you do not need to store enough bottles to fill the
entire wine cellar, we suggest that you divide them up
between the available shelves and that you do not
place them all on top or on the bottom.
Place the bottles in the centre of the shelves to see
them better from the outside.
GB
7