Filter
Top Products
41949-01 02/12/2008
12
C17
C18
C19
C20
C15
C16
Drill a hole in the center of each outline. Insert screws, leaving space between the screw head
and the joist. Screws are not provided.
Attach the rails onto the screws. Tighten screws.
Connect 4” duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may
need to be purchased.
Route wires through strain relief. For supply connection, use
wires suitable for at least 90º C (194º F).
011_41949_EngS_2-12-08.indd 12 2/12/08 2:43:52 PM