Filter
Top Products
41949-01 02/12/2008
7
A19
J
Secure the motor by tightening the 2 screws.
A20
Turn on the power source.
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
HANG FROM THE WIRING HARNESS.
0000
A17
Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched
between the motor and the housing.
0000
I
A18
ON
OFF
A21
Test the motor. If the motor does not run, check the plug
connection.
A22
E1
Go to step
on page 17
to attach grille.
011_41949_EngS_2-12-08.indd 7 2/12/08 2:43:36 PM