Filter
Top Products
A19
I
A20
Connect wiring from the motor to the wiring cover plate.
0000
A17
0000
H
A18
ON
OF
F
A21
A22
E1
Go to step
on page 17
to attach grille.
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched
between the motor and the housing.
Secure the motor by tightening the 2 screws.
Turn on the power source.
7
Test the motor. If the motor does not run, check the plug
connection.
41719-01 3/29/2006 41719-01 3/29/2006
41719_EngS_3.29.06.indd 7 3/29/06 9:16:30 PM