Hunter Fan 90066 Ventilation Hood User Manual


 
ON
OF
F
D23
D24
E1
Go to step
on page 18
to attach grille.
O
E1
N
1
2
E3
E4
E
J
E5
L
E
Attaching the Grille
Test the motor. If the motor does not run, check the plug
connection.
Rotate 4 metal clamps over glass trim.
Tighten screws on metal clamps to secure trim assembly.
Remove the thumbscrews.
Remove backs from 4 tape strips found on the trim disk.
Press metal trim disk into glass trim ring.
18
19
E2
Connect wiring harness.
E6
E
L
E7
L
J
Attach thumbscrews.
WARNING: To reduce the risk of electrical shock,
all 4 thumbscrews MUST be properly installed.
Slide light base over posts in motor housing.
E8
L
M
E9
L
M
Insert 1 Max 30 Watt CFL Pin Based Circline bulb (Included)
into spring clamps.
Connect the circline bulb.
E10
L
Screw in 1 Max 7 Watt C-7 bulb (Not Included).
41723-01 12/25/2004 41723-01 12/25/2004