Filter
Top Products
10
Hunter Fan Company 42400-01 • 09/26/05
11
42400-01 • 09/26/05 Hunter Fan Company
7 • Completing Your Installation With or Without a Light Fixture
Your Hunter fan comes with an integrated light xture assembly and an
optional switch housing cap and plug button. is feature gives you the
option of installing the fan with OR without the included light xture.
e steps below direct you whether or not you are installing a light
xture.
WARNING: Use only the light xture supplied with this fan model.
7-1. If you want to install the light xture, proceed with step 7-2
now.
If you do not want to install the light xture, you need to
uninstall it now. See “Uninstalling the Light Fixture” on page 11.
Once you have uninstalled the light xture, continue with step
7-2.
7-2. To attach the lower switch housing, connect the upper plug
connectors from the motor to the lower plug connectors in the
lower switch housing assembly.
Note: Both plug connectors are polarized and will only t together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
7-3. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with two #6-32 x 7/8” housing assembly screws.
If you are not installing the light xture, your installation is
complete. Otherwise, proceed with step 7-4.
7-4. e last installation step when installing the light xture is to
install the glass bowl. See “Installing the Glass Bowl” on page 12 for
instructions.
Housing
Assembly Screw
Step 7-3
Step 7-2