Filter
Top Products
www.HunterFanInternational.com
MB517-01 • 03/10/15 • © Hunter Fan Company
What to Expect with Your Installation
Know your wiring
If you are unfamiliar
with wiring, use a
qualied electrician.
You may need a
friend to help you.
Check box to see
fan weight
Assess location
Select a downrod length
Assess ceiling angle
Must be able to
secure the fan to
building structure or
fan-rated outlet box
1
2
Longer Downrod
for ceilings 3 m (10 feet) or higher
2
Ceiling angles greater
than 34° will require an
Angled Mounting Kit.
See page 4 for details.
w.1 - To reduce the risk of re, electrical shock, or personal
injury, mount fan directly from building structure and/or
an outlet box marked acceptable for fan support of 70 lbs
(31.8 kg) and use the mounting screws provided with the
outlet box.
w.2 - To avoid possible electrical shock, before installing
or servicing your fan, disconnect the power by turning
off the circuit breakers to the outlet box and associated
wall switch location. If you cannot lock the circuit breakers
in the off position, securely fasten a prominent warning
device, such as a tag, to the service panel.
w.3 - To reduce the risk of re, electrical shock, or motor
damage, use only Hunter Solid State Speed Controls.
w.4 - To reduce the risk of personal injury, do not bend the
blade brackets when installing the blade brackets, balancing
the blades, or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
w.5 - This product is not intended to be used by people
(including children) whose physical, sensory, or mental
capacities are different or diminished, or lack of experience
or knowledge, unless such persons receive training or work
under supervision of a person responsible for their safety.
w.6 - Children should be supervised to ensure they do not use
the devices as a toy.
c.1 - All wiring must be in accordance with national and local
electrical codes ANSI/NFPA 70. If you are unfamiliar with
wiring, use a qualied electrician.
c.2 - Use only Hunter replacement parts.
Read and Save These Instructions
This product conforms to UL Standard 507.
WARNINGS
CAUTIONS
,8 Meters
(30 inches)
from blade tip
to nearest wall
or obstruction
2,1 Meters
(7 feet)
from bottom
edge of blade
to the oor
Standard Downrod
for ceilings 2,4-3 m (8-10 feet) high