Filter
Top Products
32
Description of the cooker hood
The cooker hood
Control panel
Motorhouse
Duct
Grease filter
Work light
Functions
There are two possible systems:
Extraction of air to outside using optional
venting kit and evacuation duct.
Recirculation using optional carbon filter.
The cooker hood cannot be connected to
flues of other appliances that run on
energy sources other than electricity.
Please, keep to the provisions of official
directives regarding the question of fumes
discharge.
Accessories
The following are included with the cooker hood:
Template for mounting: Template for mounting
on wall and under cupboard (printed on packaging).
Mounting set: 4 pcs 4x60 mm screws, 4 pcs 5x30
mm screws, 4 pcs M5x30 mm screws, 4 pcs 5,3x15
mm washers, 4 pcs 5,3x10 mm washers, 4 pcs M5
mm nuts, 4 pcs spacers, 4 pcs 10 mm wall dowels, 4
pcs locknuts, 4 pcs plastic covers, 2 pcs brackets.
Cold air valve.
Instruction book.
Following is ordered from retailer:
Venting kit: When the cooker hood is to be
connected to an evacuation channel use the venting
kit containing one ventilation pipe, one roof
connecting metal flange and two clamps.
PNC 391 414 201.
LONG LIFE carbon filter: The carbon filter is to
be used when the hood is connected to the
recirculation system.
For new installations:
PNC 391 834 201 (50 cm), 391 834 200 (60/70 cm).
Replacements (after approx. 3 years):
PNC 391 837 001 (50 cm), 391 837 000 (60/70 cm).
Venting grid: Venting grid for recirculation.
PNC 391 433 101.
Use the carbon filter. When you use the
carbon filter, the air is purified within the
cooker hood and recirculated back into
the room, so heated air is not lost. It can
be a good idea to use the carbon filter in
winter and normal air extraction to a duct
in summer.