Filter
Top Products
REPLACING DOORS
1. Loosen torque on door before removing the
door. Wedge a screwdriver between the bottom of
the door and the hinge socket, then lift the door
up. This will lift the bottom hinge pin up and out
of the bottom hinge socket. Hold the hinge pin
with a 1/2 in. (13 mm) open end wrench to keep
it from spinning out and stripping the socket. See
Figure 3.
Innovator Door Installation and
Service Instruction
P/N 0425683F
3
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM
Always disconnect the electrical power at the
main disconnect when servicing or replacing
any electrical component. This includes, but is
not limited to, such items as doors, lights,
fans, heaters, and thermostats.
WARNING
!
Lift up
Screwdriver
Figure 3. Loosening Torque on the Door