Cornelius ED 300 BN Beverage Dispenser User Manual


 
1
620913202
SAFETY PRECAUTIONS
Always: disconnect power to the dispenser before servicing or cleaning.
Never: place hands inside of hopper or gate area without disconnecting power to the dispenser. Agitator rota-
tion occurs automatically when dispenser is energized!
This ice dispenser has been specifically designed to provide protection against personal injury and eliminates
contamination of ice. To insure continued protection and sanitation, observe the following:
ALWAYS: be sure the rear manual ice fill lid is properly installed to prevent unauthorized access to the hopper
interior and possible contamination of the ice.
ALWAYS: be sure the upper and lower front panels are securely fastened.
ALWAYS: keep area around the dispenser clean of ice cubes.
The sink can be easily and quickly removed. The unit must never be lifted or moved by the sink.
CAUTION: Dispenser cannot be used with crushed or flaked ice.
Use of bagged ice which has frozen into large chunks can void warranty.
The dispenser agitator is not designed to be an ice crusher. Use of large
chunks of ice which jam up inside the hopper will cause failure of the agitator
motor and damage to the hopper. If bagged ice is used, it must be carefully and
completely broken into small, cube--sized pieces before filling into the dispenser
hopper.
DESCRIPTION
The ENDURO series of ice dispensers solves your ice and beverage service needs in the sanitary, space sav-
ing, economical way. Designed to be automatically filled with ice from a top mount ice maker, these dispensers
will dispense cubes (up to 1--/4 in size), cubelets and hard--chipped or cracked ice; and, in addition, several
flavors of post--mix beverages. B units include beverage faucets and are designed to be supplied from syrup
containers and a carbonator through a remote refrigeration system for cooling the product and water lines.
SPECIFICATIONS
Model: ED300 BN (ENDURO300 BN)
Ice Storage: 300 lbs
Maximum Number of Faucets Available: 12 maximum
Built--in Cold Plate: No
Electrical: 120/1/60, Amps -- 5.2 total unit draw
Dimensions: 44--3/8I Wide X 31-1/2I Deep X 36-1/4I High