Filter
Top Products
Installation Instructions
20
UNPACKING THE COOKER
Unpack the components from inside the grill and oven: Check that the following parts
are present.
Grill pan and grid Grill pan handle
Pan supports (2) Oven shelves (2)
Enamelled discs (4) Aluminium burner bodies (4)
Literature Battery 1.5V
LEVELLING
Four skid feet are fitted which can be adjusted up or down to level the cooker.
Caution: Some soft floor coverings may get damaged if the cooker is not moved
carefully.
STABILITY BRACKET
The cooker must be fitted with a stability device firmly secured to the fabric of the
building. One of the holes in the rear panel can be used to engage a stability bracket.
The bracket must be fitted to the wall behind the
cooker. The diagram is a guide to the correct
height at which the bracket should be from the
floor.
155mm
Floor to bracket.