Filter
Top Products
The shelf supports are removable and dishwasher safe.
To remove hold the support at the front and pull away from the oven side,this can then be cleaned
in a sink or a dishwasher.
When removed it allows access to the oven side, which can be cleaned with warm soapy water.
To refit the support, insert the longer leg into the rear fixing hole and push in the front leg.
Model KT6C3 only: The grill (top cavity) runners are fixed and should not be removed for
cleaning.
Wipe with a cloth wrung out in warm soapy water followed by a wipe with a damp clean
cloth.
It is advisable to clean the decorative trims regularly to prevent any build up of soiling which may
detract from the appearance of the cooker.The recommended method of cleaning is to wipe over the
trims with a soft cloth wrung out in warm water or mild non-abrasive cleaner. (If in doubt try the
cleaner on a small area of trim which is not noticeable in normal use).Then,after wiping with a cloth
wrung out in clear water,dry with a soft clean cloth.
Never use scouring pads or abrasive cleaners/powders which may scratch the surface.
Take care during cleaning not to damage or distort the door seals.Do not lift the door seal from the
oven chassis, if necessary remove the seal by carefully unhooking the corner clips.
Take care that the rating label edges are not lifted during cleaning, and furthermore that the
lettering is not blurred or removed.
Wipe with a damp cloth and polish with a dry cloth.
Regularly wipe with a clean, damp cloth and polish with a clean dry cloth.
Wipe over the grill door decorative outer panel; with a cloth wrung out in warm soapy water, then
after wiping with a cloth wrung out in clear water,dry with a soft clean cloth.
Do not use scouring pads or abrasive powder which may scratch the surface.
Ensure that the glass panel (where fitted) is not subjected to any sharp mechanical blows.
Care and Cleaning
Oven shelf supports
Decorative trims
Control Panel:
Grill Door:
Stainless trims
23