InSinkErator HC3/GN3 Water Dispenser User Manual


 
HOW TO USE THIS INSTRUCTION MANUAL
Provides a step-by-step narrative describing the installation step, with check boxes that
can be marked as you progress through the installation.
Contains simple illustrations that provide visual instruction to support the narrative.
CAUTIONS, WARNINGS and DANGERS that will require your attention during the step.
These instructions are separated into main sections, indicated by numbers, and subsections,
indicated by capital letters. The manual is setup this way to allow you to take a break at any
point after completing a section or subsection without affecting the installation process.
What you’ll see in the
instruction manual:
1
2
3
OVERVIEW OF A
COMPLETED SETUP
HC3-SS GN3-SS H990-SS H770-SSHC-View-SS H-View-SS HC-Wave-SS H-Wave-SS
Identify the model of your instant hot water dispenser and record it here:________________
A
Property Damage: Do not pinch or break copper
tubing. Do not distort the last 1 inch of tubing.
INSTALLING THE FAUCET - View/Wave/HC3/GN3
Unpack dispenser components.
On a firm, flat surface, carefully
straighten the copper tubing.
Remove the wing nut from
the valve body.
View/Wave/HC3/GN3
1
2
An imminently hazardous situation, which, if not avoided, will result in death or serious injury.
A potentially hazardous situation, which, if not avoided, could result in death or serious injury.
A potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
3
3